Views: 7 Author: Site Editor Publish Time: 2022-06-30 Origin: Site
Regular equipment maintenance is required to keep the equipment running correctly for a more extended period. This can not only reduce the failure rate of the equipment but also prolong the service life of the equipment, which can be said to kill two birds with one stone. Now let's see how to maintain the EPS Foam Shape Molding Machine.
Maintenance of EPS Foam Shape Molding Machine
1. Check before and after use
2. Check before and after using EPS Foam Shape Molding Machine. It is necessary to determine whether the equipment can be used commonly and whether there is abnormal buzzing.
3. Especially in terms of indicator lights, we should first make sure that if there are some faults, the corresponding indicator lights will light up directly, so we can't operate normally. We must check and then use it after confirming that the fault is solved.
4. After the equipment is used, stop running, turn off the relevant power supply and valves, and cannot continue to use and energize to avoid unnecessary problems.
Simple and regular maintenance
The maintenance of the EPS Foam Shape Molding Machine is not very difficult, and the staff who use it in general also know how to handle it. For most businesses, it must be implemented at the head. Everyone must operate carefully and rotate regularly. Only by inspection can we know what problems have occurred, whether some parts need to be replaced, etc. As long as it can be maintained, it can also avoid many problems, prolong the service life of the equipment, and ensure our rights.